Simple mechanical timers, which you can buy for a couple of pounds in
every home improvement centre, are suitable for switching something on
and off one or more times per day. They can be used to control a wide
variety of devices, such as lamps inside or outside the house,lighting
for bird cages and aquariums, sump pumps, battery chargers, etc.
If you need to control something over a longer period than the standard 24 hours, you can use two timers with the second one plugged into the first one (see photos). To determine what you can do with this arrangement, you first need to determine how often the load needs to be switched. For example, if the first timer has 48 tabs the shortest ‘on’ time is 30 minutes in 24 hours. This means that the second timer will run for 30 minutes every 24 hours, so the maximum duration of a full cycle is 48 days. A device such as a charger for diving torches can be connected to the second timer.
To prevent the ‘on’ time of the second timer from exceeding 24 hours, it is essential to keep the ‘on’ time of the second timer shorter than that of the first timer. If a maximum cycle time of 48 days is too short, you can also connect a third timer. With three timers, the maximum cycle time is 2304 days (one ‘on’ time in approximately 6.5 years).
As
you can see from the photos, the second timer may interfere with the
tabs of the first timer if they are plugged together with one on top of
the other. This can be avoided by turning the second timer by 180
degrees relative to the first one.
If you need to control something over a longer period than the standard 24 hours, you can use two timers with the second one plugged into the first one (see photos). To determine what you can do with this arrangement, you first need to determine how often the load needs to be switched. For example, if the first timer has 48 tabs the shortest ‘on’ time is 30 minutes in 24 hours. This means that the second timer will run for 30 minutes every 24 hours, so the maximum duration of a full cycle is 48 days. A device such as a charger for diving torches can be connected to the second timer.
To prevent the ‘on’ time of the second timer from exceeding 24 hours, it is essential to keep the ‘on’ time of the second timer shorter than that of the first timer. If a maximum cycle time of 48 days is too short, you can also connect a third timer. With three timers, the maximum cycle time is 2304 days (one ‘on’ time in approximately 6.5 years).
